Shark Vacuum Won't Turn On: 10 Easy Ways To Fix It Now (2024)

If you’re a Shark vacuum owner, you may haveexperienced the frustration of turning on your vacuum only to find that it won’t start. While this can be a frustrating problem, it’s also common.

Fortunately, various ways exist to fix this issue without taking your vacuum cleaner to a repair shop. In this article, we’ll explore themost common reasons why your Shark vacuum won’t turn on and provide some easy-to-follow solutionsto help you get your vacuum up and running again in no time.

Why Won’t Shark Vacuum Turn On?

If you are experiencing difficulties with your Shark vacuum cleaner, one of the most frustrating issues you may encounter is whenit won’t turn on.

Many variables can contribute to this, and determining the root cause might be difficult. Here are some possible reasons that you should consider when trying to diagnose the issue:

1. Power Source Issues

If your Shark vacuum doesn’t turn on, you must first checkwhether it is appropriately connected to a power source.

If thepowercord is damaged or the outlet is faulty, your vacuum may not get the power supply it needs. Try plugging the vacuum into a different power outlet or use another power cord to determine if that is the issue.

2. Clogs and Blockages

Another reason your Shark vacuum may not be turning on is due toclogs or blockages in the vacuum’s system. This can happen whendust, debris, or hair accumulates in the filters, hose, or brush roll. If this happens, your vacuum’s motor may become overheated, which can cause it to shut off.

To solve this issue, you canclean the filters, hose, and brush roll to remove blockagesand ensure the vacuum can operate adequately.

3. Faulty Power Button

Afaulty power switchcan also cause a Shark vacuum that won’t turn on. Over time, the power button can wear out, break, or become stuck, making it difficult or impossible to turn on the vacuum.

To solve this issue, you may need toreplace the power button, which involves opening the vacuum and replacing the faulty part.

4. Overheated Motor

If you use your Shark vacuum for an extended period, themotor can become overheated, causing the vacuum to shut off. This is a safety feature designed to prevent the vacuum from becoming damaged.

To avoid this issue, give the vacuum a break after extended use to allow the motor to cool down. Regularlycleaning the filters and removing blockagescan help the motor run more efficiently and prevent overheating.

5. Broken Belt

If your Shark vacuum has a brush roll, it may have abroken belt, causingit to malfunction. The belt connects the motor to the brush roll, allowing it to spin and pick up dirt and debris.

If thebelt is broken or worn out, it can cause the brush roll to stop spinning, resulting in the vacuum not turning on.Replacing the broken belt can solve this issueand recharge your vacuum.

6. Faulty Motor

Sometimes, a Shark vacuum that won’t turn on may have afaulty motor. This is often the result ofwear and tearover time or a manufacturing defect.

If the motor is faulty, you may need to have itreplaced or repaired by a professional. It’s best to contact Shark customer service or a certified repair center to assess the issue and determine the best course of action.

By understanding these causes, you canquickly diagnose and fix any issues with your Shark vacuum that won’t turn on, ensuring that it runs smoothly and effectively for all your cleaning needs.

How to Fix a Shark Vacuum that Won’t Turn On

If you’re facing the issue of a Shark vacuum that won’t turn on, it can be a frustrating experience. Luckily,there are some things you can do to try and fix the problem on your own. Here are some simple step guides that you can try to get your Shark vacuum working again:

1. Check the Power Source

The first thing to do is to ensure that theShark vacuum is properly plugged in and that the power outlet is functioning. If the vacuum is plugged in but still not turning on, try plugging it into a different outlet. If the outlet is the issue,reset the circuit breaker or replace the fuse.

2. Inspect the Power Cord

If the power socket (source) is not the problem, thepower plug (or cord) may be damaged. Check the cable for any signs of damage or fraying. If the cord is damaged, it will need to be replaced. It’s recommended that you have a professional replace the cord.

3. Check for overheating

If yourvacuum overheats, it may shut off and refuse to turn it back on until it cools down. Check for anyblockages causing the vacuum to overheat, and wait for it to cool down before turning it back on.

4. Clean the Filters

Aclogged or dirty filtercan prevent the Shark vacuum from turning on. Check the vacuum filters and clean or replace them as needed.

You canclean filtersby gently tapping them on a hard surface to dislodge any dust or debris. Before reinstalling washable filters, thoroughly clean them with water and allow them to dry fully.

5. Empty the Dustbin

Afull dustbincan cause the Shark vacuum to shut off. Locate the dustbin on your vacuum and remove it. Empty the contents into a trash can.Use a damp cloth to thoroughly clean the dustbin and allow it to dry completely before reinstalling it into the vacuum.

6. Check the Brush Roll

Atangled brush rollcan also prevent the Shark vacuum from turning on.

Please turn off the vacuum and unplug it before checking the brush roll.Remove hair or debris from the brush roll using scissors or a brush. You may also need toremove the brush rolland clean it thoroughly.

7. Check the Hose

Ablocked hosecan cause the Shark vacuum to stop working.

Remove the hose and check for any blockages. You canremove debris by gently shaking the hose or using a long, thin object like a wire hanger to push through the clog.

8. Reset the Motor

If none of the above fixes work, the vacuum motor may have overheated and shut off automatically. Toreset the motor, unplug the vacuum and let it cool for at least an hour. After an hour, plug the vacuum back in and turn it on.

9. Check the Battery (Cordless Vacuums Only)

If you have a cordless Shark vacuum,check the vacuum battery. Make sure it is properly charged and installed correctly. If the battery is damaged, it will need to be replaced.

10. Contact Shark Customer Support

If the vacuum still doesn’t turn on after trying all the above fixes,contact Shark customer support for further assistance. They can offer additional troubleshooting tips or guide you on how to get the vacuum repaired or replaced.

Following these steps, you canfix your Shark vacuum that won’t turn on. If the issue persists, it’s best to seek the help of a vacuum repair expert.

FAQs

Is there a reset button on the Shark vacuum?

Yes,some Shark vacuum models have a reset buttonthat can be used to fix specific issues, such as the vacuum not turning on or losing suction. However, not all models have a reset button, so it’s best to consult the user manual or contact Shark customer support for assistance.

If your Shark vacuum does have a reset button, it is typically located on the back or bottom of the machine. To use it,press and hold the reset button for a few seconds, then release it. This should reset the vacuum and may fix the issue.

However, if the problem persists, it’s recommended totry other troubleshooting steps or contact Shark customer support for further assistance.

Why is my Shark motor not turning?

There areseveral reasons why the motor on a Shark vacuum may not be turning, including the following:

Clogs: A blockage in the vacuum’s hose, wand, or brush roll might prohibit the motor from spinning. Check all parts of the vacuum to ensure there are no clogs.

Broken belt: A broken or worn-out belt can also prevent the motor from turning. Check the belt to see if it needs to be replaced.

Motor failure: If the motor has failed, it must be replaced. This can happen due to wear and tear over time or if the vacuum has been used excessively.

Power issue: If the vacuum is not receiving power, the motor will not turn. Check the power cord and outlet to ensure they are both working properly.

Overheating: If the vacuum’s motor has overheated, it may shut off to prevent damage. Allow the vacuum to cool down before attempting to turn it on again.

If none of these solutions work, contacting the manufacturer or professional repair service may be best for further assistance.